![background image](http://html.mh-extra.com/html/nec/powermate-es-5200-service/powermate-es-5200-service_service-manual_248673152.webp)
Disassembly and Reassembly 3-69
Removing the Front Control Board — Minitower
Remove the front control board from a minitower system by following these
steps.
1.
Turn off the system and disconnect the system power cord.
2.
Ensure that all external cables are disconnected from the front and rear of
the system.
3.
Remove the left and right system unit covers (see “Removing the Minitower
Side Covers”).
4.
Remove the front panel (see “Removing the Front Panel — Minitower”).
5.
Remove the top cover (see “Removing the Minitower Top Cover”).
6.
Label and disconnect the front feature connector from the riser board (for the
location of the connector see the figure “Riser Board Auxiliary Cable
Connectors — Minitower” in Section 5).
7.
Remove the cable from the clips that secure it within the chassis.
8.
Remove the five screws securing the front control board to the front of the
chassis (see the following figure).
Locating the Front Control Board Screws — Minitower
9.
Pull the front control board off the front of the chassis and gently pull the
front connector cable through the cutaway in the front wall of the chassis.
Summary of Contents for POWERMATE ES 5200 - SERVICE
