Disassembly and Reassembly 3-47
Expansion Board Slots and Connectors — Minitower
A – Slots for ISA Boards
D – Not Used
B – Slots for PCI Boards
E – ISA Connectors
C – PCI Connectors
Note:
If the minitower riser board has four PCI
connectors, the fourth PCI connector (the lowest one, next to
the ISA connector) is not supported and cannot be used.
Removing a Slot Cover — Small Desktop or Desktop
To remove the slot cover from an expansion board slot in a small desktop or
desktop system, use the following steps.
1.
Remove the system unit cover (see “Removing the Small Desktop or
Desktop Cover”).
2.
Remove the screw securing an expansion board slot cover (see the figure on
the following page). Set the screw aside (it is used to secure the expansion
board).
3.
Remove the slot cover. Save it to cover the slot again in case the expansion
board is removed.
4.
Install an expansion board (see “Installing an Expansion Board — Small
Desktop or Desktop”).
!
CAUTION
A slot cover can damage the system board or any option
board if it falls into the system. Take care to keep the slot
cover from falling when removing the screw.
If the slot cover does fall into the unit, remove it before
replacing the cover.
Summary of Contents for POWERMATE ES 5200 - SERVICE
