NEC POWERMATE ES 5200 - SERVICE, Service Manual

Page: 93 / 306

3-10 Disassembly and Reassembly
5.
Push up on the slide lock at the rear of the chassis to unlock the side cover
(see the following figure).
6.
While holding the rear of the system unit with one hand, grasp the recess in
the side cover with your other hand and slide the cover back about an inch.
As the cover fits tightly, you may need both hands to slide the cover.
7.
Pull the top of the side cover out from the chassis about one-half inch, and
then lift the cover up and off the system.
Releasing the Minitower Left Side Cover
A – Slide Lock C – Left Side Cover
B – Recess
Replacing the Minitower Side Covers
Always replace the right side cover before replacing the left side cover. Replace
the right and left side covers as follows.
!
CAUTION
Ensure that all cables are positioned to prevent kinking,
crimping, abrasion, or cutting while installing the side cover.
Check that the ribbon cables are folded along their fold lines
and out of the direct path of the side cover.
Note:
Always replace the right side cover before
replacing the left side cover.
1.
Position the side cover over the side of the chassis so that the back edge of
the cover is about an inch beyond the back edge of the chassis.