Mitsubishi Electric MR-J2S CP-S084 Series, Manual

Page: 78 / 152

３ - １
Section 3 How to Replace MR-J2S Renewal Tool
３.１ Replacement Procedure
Follow the steps below for replacement.
See section 3.2, "Checking the Accessories."
See section 3.3.
See Section 4, "Starting Up the System."
See Section 5, "Setting Up Parameters."
３.２ Checking the Accessories
Open the package. Make sure that the package contains what you have ordered.
（１）Renewal Kit
①SC-J2S(B)J4KT02K、②SC-J2S(B)J4KT06K、③SC-J2S(B)J4KT1K、④SC-J2S(B)J4KT3K
⑤SC-J2S(B)J4KT5K、⑥SC-J2S(B)J4KT7K、⑦SC-J2S(B)J4KT15K、⑧SC-J2S(B)J4KT22K
Quantity
№ Name of Package
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
1
TE Bracket
1 1 1 1 1 2 2
2
Mounting Bracket
1 1
3
Base/Amplifier Base
1 1 1 1 1 1
4
Servo Amplifier Mounting Screws (Spring Washer with
Small Plain Washer M5 x 12)
2 2 3 3 8 8 4
5
Base Mounting Screws (Spring Washer with Small Plain
Washer M10 x 20)
4 8
6
TE1 Bracket Mounting Screws (Spring Washer Plain Washer
M3 x 6)
2 2 4 4
7
TE1 Bracket Mounting Screws (Spring Washer Plain Washer
M4 x 8)
6 6
8
Control Signal Conversion Cable
1 1 1 1 1 1 1 1
9
Monitor Conversion Cable *1
1 1 1 1 1 1 1 1
10 Encoder Conversion Cable 1 1 1 1 1 1 1 1
11 24V DC Power Connection Cable 1 1 1 1 1 1 1 1
12 Main Circuit Terminal Harness 2
13 Flexible Bus Bar 2
14 Cable Tie 4 4 4 4 2 2 2 2
Note Number (1) above does not include a servo amplifier or a servomotor. You need to purchase
one from Mitsubishi Electric Corporation.
*1. Included for Type A only
Use Renewal Tool for replacement.
Start up the system and make operation.
Check the accessories in the package.
3 － 1