３
-
９
・Type of the servo amplifier・・・The case of Type A with the amplifier capacity of 11kW or higher
You are going to connect the currently used cable to the conversion cable.
●
The connectors (CN1A, CN1B, and CN2) on the conversion cable are all in
the same shape. Use caution not to make an incorrect connection. If you
make an incorrect connection, the servo amplifier may be broken.
The connectors (CN1A, CN1B, and CN2) on servo amplifier MR-J2S-_A are all in the same shape. If
you connect a currently used cable to a wrong connector and turn on power, the amplifier, the
motor, and/or the like may be broken due to the difference in voltage.
CN2
C
N
1A
制御信号変換ケーブル
（SC-J2SJ4CTC03M）
エンコーダ変換ケーブル
（SC-J2SJ4ENC03M）
CN1
B
CN1A用
CN1B用
モニタ変換ケーブル
（SC-J2SJ4MO2C03M）
変換ケーブル側
既設制御信号ケーブル
既設エンコーダケーブル
既設モニタケーブル
既設ケーブル側
●
Do not fasten the encoder conversion cable and the control signal
conversion cable on a power cable or on a drive cable. Dosing so may cause
an incorrect operation.
Use cable ties (accessories in the package) to fasten and fix the cables
on the control signal conversion cable of Renewal Kit or on the currently
used control signal connection cable.
Connectors CN1A, CN1B and CN2 are
all in the same shape. Use caution
not to make an incorrect connection.
CAUTION
Side of the Conversion Cable
Side of the Currently Used Cable
Control signal conversion cable
Encoder conversion cable
Monitor conversion cable
For CN1A
For CN1B
Currently used control
signal cable
Currently used encoder
cable
Currently used monitor
cable
CAUTION
3 － 9
Summary of Contents for MR-J2S CP-S084 Series
Page 9: ...A 8 MEMO A 8 ...
