２-４０
(2) Secondary replacement (when replacing the servo motor after replacing the servo amplifier)
/Package replacement (when replacing the servo amplifier and the servo motor simultaneously
Electromagnetic
brake
24 V AC
Encoder
Make sure to remove the wiring for the built-in regenerative resistor.
Note2)
CN10A
CN10B
CN3
CN2
200 V AC to
230 V AC
Connection of regenerative option
(for SC-J2SBJ4KT7K)
Regenerative
option
（
Note1)
Built-in
regenerative
resistance
1-phase
100 V AC
（
Note 4)
24 V DC
power supply
connection
cable
Power supply for I/F
(24 V DC)
Control signal
conversion cable
Built-in
regenerative
resistance
Encoder
conversion
cable
SSCNET conversion unit
(MR-J4-T20)
Renewal kit
(SC-J2SBJ4KT
K)
Servo amplifier
(MR-J4-
B-RJ020)
Servo motor
for MR-J4
Power supply
conversion cable
on the motor side
Encoder
conversion cable
on the motor side
Brake
conversion cable
on the motor side
（
Note3)
Control signal
Controller
or
Servo amplifier
Servo amplifier
or
Terminal resistor
Analog monitor
(
Note1)
(
3-phase
Note 1. When using the regenerative option, make sure to remove the wiring for the regenerative resistor built in to the servo amplifier,
and mount the regenerative option between P+ and C. Ensure the connection destinations are correct. The servo amplifier
may malfunction if the connection destinations are incorrect.
For details, refer to MR-J4-_B-RJ020 Series Servo Amplifier Technical Reference Material issued by Mitsubishi Electric
Corporation.
2. There is no conversion terminal block in the SC-J2SBJ4KT7K renewal kit. Directly connect to the MR-J4 servo amplifier.
For details, refer to MR-J4-_B-RJ020 Series Servo Amplifier Technical Reference Material issued by Mitsubishi Electric
Corporation.
3. Unnecessary if electromagnetic brakes are not installed.
4. Required only when the internal power supply (24 V DC) for the I/F is used in the existing MR-J2S-_B_ servo amplifier.
Not included with the renewal tool. Note that a separate 24 V DC power supply (current capacity: 80 mA or more) is required
when replacing.
When connecting the 24 V DC power supply, use the "24 V DC power supply connection cable (model: SC-J2SJ4CTPWC5M)"
included in the package.
(Electric wire colors: Red (+ side); white (- side))
No.
Product name
(1)
Servo amplifier
*1,2
(2)
Servo motor
*1
(3)
SSCNETconversion unit
*1,2
(4)
Renewal kit
*2
(5)
Encoder conversion cable
*2
(6)
Control signal conversion cable
*2
(7)
24 V DC power supply connection cable
*2
(8)
Power supply conversion cable on the
motor side
(9)
Encoder conversion cable on the motor
side
(10)
Brake conversion cable on the motor
side
*1: Manufactured by Mitsubishi Electric.
*2: For secondary replacement, replacement finished
through primary replacement
2 － 40
Summary of Contents for MR-J2S CP-S084 Series
Page 9: ...A 8 MEMO A 8 ...
