Mitsubishi Electric MR-J2S CP-S084 Series, Manual

Page: 68 / 152

２-４１
２.５.８ SC-J2SBJ4KT15K、22K
(1) Primary replacement (when replacing the servo amplifier only)
検出器
サーボモータ
MR- J2S
用
AC200V
～
230V
三相
エンコーダ
変換 ケーブル
②
①
∞ ∞
I/ F
用電源
(DC 24V
) AC100V
単相
（注
3
）
⑦
CN10 A
CN10B
③
⑥
（
MR-J4-T20
）
(SC-J2SBJ4KT K)
( )
④
MR-J4- B -RJ020
⑤
CN2
CN 3
CON 2
CN 4
DC24V
電源接続
ケーブル


Renewal kit
Servo motor
for MR-J2S
Encoder
conversion cable
Control
signal
Controller
or
Servo amplifier
Servo amplifier
or
Terminal resistor
Analog
monitor
Forced
stop
Control signal
conversion cable
Encoder
SSCNET conversion unit
Power supply for
the cooling fan
Cooling fan
3-phase
200 V AC to
Regenerative
option
1-phase
100 V AC
(Note3)
Power supply for I/F
(24 V DC)
Servo amplifier
24 V DC power supply
connection cable
(Note2)
(Note4)
(Note1)
230 V AC
Note 1. Make sure to connect between P3 and P4. When using the power factor improving DC reactor, remove the short circuit bar
between P3 and P4 before connection.
For details, refer to MR-J4-_B-RJ020 Series Servo Amplifier Technical Reference Material issued by Mitsubishi Electric
Corporation.
2. When using the regenerative option, make sure to mount the regenerative option between P+ and C. Ensure the connection
destinations are correct. The servo amplifier may malfunction if the connection destinations are incorrect.
For details, refer to MR-J4-_B-RJ020 Series Servo Amplifier Technical Reference Material issued by Mitsubishi Electric
Corporation.
3. Required only when the internal power supply (24 V DC) for the I/F is used in the existing MR-J2S-_B_ servo amplifier. Not
included with the renewal tool. Note that a separate 24 V DC power supply (current capacity: 80 mA or more) is required when
replacing.
When connecting the 24 V DC power supply, use the "24 V DC power supply connection cable (model: SC-J2SJ4CTPWC5M)"
included in the package.
(Electric wire colors: Red (+ side); white (- side))
4. When connecting a power regenerative converter (FR-RC-_K) and a brake unit (FR-BU2-_K), connect between P+ and N-.
Make sure to remove the built-in regenerative resistor or the regenerative option.
For details, refer to MR-J4-_B-RJ020 Series Servo Amplifier Technical Reference Material issued by Mitsubishi Electric
Corporation.
No. Product name
(1) Servo amplifier *1
(2) Servo motor *1
(3) SSCNETconversion unit *1
(4) Renewal kit
(5) Encoder conversion cable
(6) Control signal conversion cable
(7)
24 V DC power supply
connection cable
*1: Manufactured by Mitsubishi Electric.
2 － 41