３
-
８
（８）Connecting the Conversion Cable and the Currently Used Cable
・Type of the servo amplifier: The case of Type A with the amplifier capacity of 7kW or lower
You are going to connect the currently used cable to the conversion cable.
●The connectors (CN1A, CN1B, CN2, and CN3) on the conversion cable
are all in the same shape. Use caution not to make an incorrect
connection. If you make an incorrect connection, the servo
amplifier may be broken.
The connectors (CN1A, CN1B, CN2, and CN3) on servo amplifier MR-J2S-_A are all in the same shape.
If you connect a currently used cable to a wrong connector and turn on power, the amplifier, the motor,
and/or the like may be broken due to the difference in voltage.
CN2
CN1
A
制御信号変換ケーブル
（SC-J2SJ4CTC03M）
エンコーダ変換ケーブル
（SC-J2SJ4ENC03M）
CN3
CN
1
B
CN1A用
CN1B用
モニタ変換ケーブル
（SC-J2SJ4MOC03M）
変換ケーブル側
既設制御信号ケーブル
既設エンコーダケーブル
既設モニタケーブル
既設ケーブル側
●
Do not fasten the encoder conversion cable and the control signal
conversion cable on a power cable or on a drive cable. Dosing so may cause
an incorrect operation.
Use cable ties (accessories in the package) to fasten and fix the cables
on the control signal conversion cable of Renewal Kit or on the currently
used control signal connection cable.
The connectors are all in the same
shape. Use caution not to make an
incorrect connection.
CAUTION
Side of the Conversion Cable
Side of the Currently Used Cable
Control signal conversion cable
Encoder conversion cable
Monitor conversion cable
For CN1A
For CN1B
Currently used control
signal cable
Currently used encoder
cable
Currently used monitor
cable
CAUTION
3 － 8
Summary of Contents for MR-J2S CP-S084 Series
Page 9: ...A 8 MEMO A 8 ...
