MR-J2S Renewal Tool for
Mitsubishi General-purpose AC Servo
Manual for Replacement from
MELSERVO-J2S Series Using MR-J2S
Renewal Tool
Thank you for purchasing Mitsubishi MR-J2S Renewal Tool (hereinafter, referred to as the
renewal tool).
To use the renewal tool correctly and safely, please read this document well before use,
and sufficiently understand its functions and performance.
Notes
1. All rights reserved.
2. The information in this document is subject to change without notice.
3. In some cases where this renewal tool is used, all functions may not be compatible
with those of MR-J2S Servo.
4. If the positioning module (Model A1SD75P), high-speed counter (Model A1SD61) or
servo system controller is used, it may be required to change the existing wiring
to prevent noise depending on the existing situation.
5. When using the renewal tool, you must read this document and“Guide for Replacing
MR-J2S/J2M Series with J4 Series L(NA)03093”issued by Mitsubishi Electric
Corporation. Prepare the manual in advance.
Summary of Contents for MR-J2S CP-S084 Series
Page 9: ...A 8 MEMO A 8 ...
