３
-
５
(３)Mounting the TE1 Bracket
Use the screws (M3
×
6; 2 screws) that come as accessories in the package to mount, depending on whether
a battery is used or not, the TE1 bracket ① that you in advice removed the terminal block from.
(４) Mounting the Terminal Block
Mount the terminal block that you
removed in advance on the TE1 bracket①.
* When mounting the bracket, pay attention to
the direction of the terminal block.
If you try to mount it in an incorrect direction, you
cannot mount it correctly. Be careful.
Arrangement of
the Terminals
L
1
L
2
L
3
U
V
W
TE1
Note
A schematic view seen from the
front side of the amplifier
①TE1 bracket
①TE1 bracket
①TE1 bracket
Battery option
「MR-BAT6V1SET」
When a battery is used
(in the case of an absolute position
detection system)
When a battery is not used
(in the case of an incremental system)
①TE1 bracket
When a battery is used
(in the case of an absolute position
detection system)
When a battery is not used
(in the case of an incremental system)
3 － 5
Summary of Contents for MR-J2S CP-S084 Series
Page 9: ...A 8 MEMO A 8 ...
