Mitsubishi Electric MELSERVO MR-J4-A-RJ Series, Instruction Manual

Page: 354 / 416

10. COMMUNICATION FUNCTION
10 - 3
Command Data No. Description Status display
Control
mode
Frame
length
C
P C
L
P
S
[0] [1] [8] [0] Status display data value and
processing information Cumulative feedback pulses
Servo motor-side cumulative feedback
pulses (after gear) 12
[8] [1] Servo motor speed
Servo motor speed
[8] [2] Droop pulses
Servo motor-side droop pulses
[8] [3] Cumulative command pulses
[8] [4] Command pulse frequency
[8] [5] Analog speed command voltage
Analog speed limit voltage
[8] [6] Analog torque limit voltage
Analog torque command voltage
[8] [7] Regenerative load ratio
[8] [8] Effective load ratio
[8] [9] Peak load ratio
[8] [A] Instantaneous torque
Instantaneous thrust
[8] [B] Position within one-revolution
Servo motor encoder position within one-
revolution
Virtual position within one-revolution
[8] [C] ABS counter
Servo motor encoder ABS counter
Virtual ABS counter
[8] [D] Load to motor inertia ratio
Load to motor mass ratio
[8] [E] Bus voltage
[8] [F] Load-side cumulative feedback pulses
[9] [0] Load-side droop pulses
[9] [1] Load-side encoder information 1
Z-phase counter
[9] [2] Load-side encoder information 2
[9] [6] Temperature of servo motor thermistor
[9] [7] Servo motor-side cumulative feedback
pulses (before gear)
[9] [8] Electrical angle
[9] [E] Servo motor-side/load-side position
deviation
[9] [F] Servo motor-side/load-side speed deviation
[A] [0] Encoder inside temperature
[A] [1] Settling time
[A] [2] Oscillation detection frequency
[A] [3] Number of tough drive operations
[A] [8] Unit power consumption
[A] [9] Unit total power consumption
[A] [A] Current position
[A] [B] Command position
[A] [C] Command remaining distance
[A] [D] Point table No./Program No./
Station position No.
[A] [E] Step No.
[A] [F] Analog override voltage
[B] [0] Override level