Mitsubishi Electric MELSERVO MR-J4-A-RJ Series, Instruction Manual

Page: 333 / 416

7. PARAMETERS
7 - 76
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Control mode
CP CL PS
PT42
*OVM
Digital
override
minimum
multiplication Set a minimum speed for when the digital override function is enabled.
When you use the digital override function, multiplication can be set with [Pr. PT42]
and [Pr. PT43]. Set this and [Pr. PT43] at a time.
Refer to the following table for how to calculate multiplication value.
Setting "0" will be recognized as "1".
Setting range: 0 to 100 0
[%]
(Note) Input device
Multiplication [%]
OV3 OV2 OV1 OV0
0 0 0 0 Fixed to 100
0 0 0 1 [Pr. PT42]
0 0 1 0 [Pr. PT42] + [Pr. PT43] × 1
0 0 1 1 [Pr. PT42] + [Pr. PT43] × 2
0 1 0 0 [Pr. PT42] + [Pr. PT43] × 3
0 1 0 1 [Pr. PT42] + [Pr. PT43] × 4
0 1 1 0 [Pr. PT42] + [Pr. PT43] × 5
0 1 1 1 [Pr. PT42] + [Pr. PT43] × 6
1 0 0 0 [Pr. PT42] + [Pr. PT43] × 7
1 0 0 1 [Pr. PT42] + [Pr. PT43] × 8
1 0 1 0 [Pr. PT42] + [Pr. PT43] × 9
1 0 1 1 [Pr. PT42] + [Pr. PT43] × 10
1 1 0 0 [Pr. PT42] + [Pr. PT43] × 11
1 1 0 1 [Pr. PT42] + [Pr. PT43] × 12
1 1 1 0 [Pr. PT42] + [Pr. PT43] × 13
1 1 1 1 Fixed to 0
Note. 0: Off
1: On
PT43
*OVS
Digital
override pitch
width Set an override pitch width for when the digital override function is enabled.
When you use the digital override function, multiplication can be set with [Pr. PT42]
and [Pr. PT43]. Set this and [Pr. PT42] at a time.
Refer to the table of [Pr. PT42] for settings.
Setting "0" will be recognized as "1".
Setting range: 0 to 20 0
[%]