Mitsubishi Electric MELSERVO MR-J4-A-RJ Series, Instruction Manual

Page: 331 / 416

7. PARAMETERS
7 - 74
No./
symbol/name
Setting
digit
Function
Initial
value
[unit]
Control mode
CP CL PS
PT29
*TOP3
Function
selection T-3 Set a polarity of DOG, SIG, PI1, PI2, and PI3.
_ _ _ x
(HEX)
_ _ _ x (BIN): DOG (Proximity dog) polarity selection
0: Dog detection with off
1: Dog detection with on 0h
_ _ _ x (BIN): SIG (External limit/Rotation direction decision/Automatic speed
selection) polarity selection
0: Normally open contact
1: Normally closed contact
_ _ x _ (BIN): For manufacturer setting
_ x _ _ (BIN): For manufacturer setting
x _ _ _ (BIN): For manufacturer setting
_ _ x _
(HEX)
_ _ _ x (BIN): PI1 (Program input 1) polarity selection
0: Positive logic
1: Negative logic 0h
_ _ x _ (BIN): PI2 (Program input 2) polarity selection
0: Positive logic
1: Negative logic
_ x _ _ (BIN): PI3 (Program input 3) polarity selection
0: Positive logic
1: Negative logic
x _ _ _ (BIN): For manufacturer setting
_ x _ _ For manufacturer setting 0h
x _ _ _ For manufacturer setting 0h
Convert the setting value into hexadecimal as follows.
0
Initial value
BIN HEX
Setting
0
0
0 0
0
0
DOG (Proximity dog) polarity selection or SIG
(External limit/Rotation direction decision/
Automatic speed selection) polarity selection
0
Initial value
BIN HEX
Setting
0
0
0
0 PI1 (Program input 1) polarity selection
PI2 (Program input 2) polarity selection
PI3 (Program input 3) polarity selection