Mitsubishi Electric City Multi CMB-P1016NU-G, Service Handbook

Page: 131 / 349

- 122 -
[
VII
Control ]
Note1: All are set to OFF at factory shipment. Unless otherwise specified, set the switch to OFF where indicated by "-,"
which may be set to a certain setting for a reason.
Note2: Cooling-only operation is performed to prevent freezing when the water temperature TH6 reaches below 5°C[41°F]
or TH9 reaches below 3°C[37°F] while the compressor is stopped.
This operation is stopped when both TH6 and TH9 reach abode 10°C[50°F], two hours have passed since the be-
ginning of this operation, or a signal to resume normal operation is received.
SW4
1 - - - -
2 - - - -
3 - - - -
4 - - - -
5 - - - -
6 - - - -
7
NIGHT MODE/Step
DEMAND mode
NIGHT MODE Step DEMAND Before power on
8 - - - -
9 - - - -
10 - - - -
SW5
1 - - - -
2 - - - -
3 LED Display "°C" "kg/cm
2
G" "°F" "psi" When switching on the power
4 - - - -
5 - - - -
6 - - - -
7 - - - -
8 - - - -
9 - - - -
10 - - - -
Switch Function
Function according to switch setting Switch setting timing
OFF ON OFF ON