NV5100MC Master Control • Reference Man ual
157
A. Special Features
Intuition XG
shown here
—
such as
number
or
duration
—
are displayed by Xstudio in a drop-down menu as
shown in Figure A-1:
1 Squeeze move ( number, duration )
Executes the squeeze effect identified by
number
(in the range 1–32) for a specified
duration
expressed in frames.
S
Squeeze effects are created and ordered by numbers assigned in MasterConfig.
2 Squeeze move cut ( number )
Executes the squeeze effect identified by
number
(in the range 1–32). Being a
cut
, there is no
duration.
3 Squeeze move default transrate ( number )
Executes the squeeze effect identified by
number
(in the range 1–32) using the default transi-
tion rate.
4 Squeeze move reverse ( duration )
Reverse-executes the squeeze effect previously selected over the previously specified
duration
(expressed in frames).
5 Squeeze move reverse cut ( )
Reverse-executes the squeeze effect previously selected. Being a
cut
, there is no duration.
6 Squeeze move reverse default transrate ( )
Reverse-executes the squeeze effect previously selected at the default transition rate.
7 Squeeze override P2 position/size ( top, left, height, width, opacity )
The commands sets up the
image 2
parameters for the two “run with P2” commands following.
The parameters
top
and
left
specify the position of the image. The
height
and
width
parameters
specify the size. Squeeze image 2 further has an opacity value specified by
opacity
.
S
“P2” is Miranda’s internal code for squeeze image 2.
Units are 0.1 percent and range from 0–1000. The size parameters must be at least 300 (30%).
8 Squeeze override position/size ( top, left, height, width )
The commands sets up the
background image
parameters for the “run” and “run with P2” com-
mands following. The parameters
top
and
left
specify the position of the image. The
height
and
width
parameters specify its size.
Units are 0.1 percent and range from 0–1000. The size parameters must be at least 300 (30%).
9 Squeeze override run ( number, duration )
Executes the squeeze effect identified by
number
(in the range 1–32) for a specified
duration
(expressed in frames). This squeeze uses the overrides of item 8.
10 Squeeze override run cut ( number )
Executes the squeeze effect identified by
number
(in the range 1–32). Being a
cut
, there is no
duration. This squeeze uses the overrides of item 8.
11 Squeeze override run with P2 ( number, duration )
Executes the squeeze effect identified by
number
(in the range 1–32) for a specified
duration
(expressed in frames). This squeeze uses
both
squeeze images, background and image 2, and
thus uses the overrides of item 8 and item 7.
Summary of Contents for NV5100MC Master Control
