30
Rev 2.10 • 17 Feb 11
3. Frames
Input (and Output) Cards
Input (and Output) Cards
Each input (and output) module employs one or more DC-DC converters to convert the +48VDC
on the backplane into the appropriate regulated supply voltage(s).The combination of pre-regula-
tors and DC-DC converters and supply voltages varies from module type to module type, depend-
ing on the requirements of the associated circuitry. There is a non-serviceable, self-resetting 1A
fuse located on each module.
The master control system uses input cards. Its MCPMs are its output modules. The multi-format
router (MFR) does of course use output cards. Refer to the
NV5128 Multi-Format Router User’s
Guide
for information on the output cards and information about the router.
This table lists the I/O cards and backplanes related specifically to master control.
SWB cards support both HD and SD video. The 3Gig cards support 1080p in addition.
The input cards in group A work in all input slots of NV5128-MC frame. They do
not
work in slots
5–8 of the NV5100MC frame. (Keep in mind that frame slots 5–12 are
input
slots 1–8.)
Input cards in group B work in all input slots of the NV5100MC frame and
must
be used in slots 5–
8. These cards consume more power (25W) than the SD video cards (17W), so it would be prudent
to use the SD video cards in slots 9–12 if you require additional SD video.
The MCPM-HD, -HD2, MCPM-SDHD, and MCE require video in slots 5–8 and audio in slots 9–
16. These processors are consistent with the division of the input slots. It is only when you are
using an MCPM-SD or MCPM-MK-SD that any complication occurs. That is because the SD pro-
cessors allow audio in all slots and video in all slots.
S
The MCPM-MK-HD does not receive input from the motherboard and so does not use any
input cards. Its 16 BNCs support HD (and not SD or 3Gig) video for its exclusive use.
The NV5100MC frame allows multiple (single-slot) SWB output cards. The NV5128-MC frame
allows one.
The NV5100MC frame provides throughput for up to 8 HD MCEs. The throughput of the NV5128-
MC is less.
Card
Part No
Backplanes
Analog Audio
NV5000-AA-IN
IO5000-AA-IN
(DB25)
Synchronous AES
NV5000-SA-IN
IO5000-AES-IN-TP
/
IO5000-AES-IN-
BNC
Analog Video Conversion
NV5000-AVC-IN
IO5000-AVC-IN
SD Video
NV5000-SD-IN
IO5000-SD-IN
SWB Video
(input)
NV5000-HD-IN
IO5000-HD-IN
SWB Video
(output)
a
a. This SWB output card fits in the wing slots of an MCPM -HD or -HD2 or MCPM-SDHD.
NV5000-HD-OUT
IO5000-HD-OUT
SWB Video
(input)
NV5100MC-SWB-IN
IO5100MC-3GIG-IN
b
b. The 3Gig backplanes are us ed for SWB I/O cards.
SWB Video
(output)
c
c. Any output cards belong to the MFR, if it is present in the frame.
NV5100MC-SWB-OUT
IO5100MC-3GIG-OUT
3Gig Video
(input)
NV5100MC-3GIG-IN
IO5100MC-3GIG-IN
3Gig Video
(output)
NV5100MC-3GIG-OUT
IO5100MC-3GIG-OUT
Summary of Contents for NV5100MC Master Control
