Miranda NV5100MC Master Control, Reference Manual

Page: 149 / 240

NV5100MC Master Control • Reference Man ual 135
6. Control Panels
CECP GUI
Figure 6-3 identifies the sections of the GUI:
Figure 6 -12. New G UI
S
The PC on which the GUI runs must be set up to operate on the master control network.
Like the CECP, the GUI has 4 rows of 16 buttons. Informally, we call these rows the preset bus, the
program bus, the preview bus, and the aux bus. When the GUI is controlling an MCE, the preview
bus and aux bus are active (enabled). For other MCPMs, they are inactive. All 4 buses are config-
urable.
S
Reminder: the buses exist in the MCPM or MCE under control. The button rows are patterned
after the buses and control the buses. It is safe to think of the button row as a bus.
The preset, program, and preview buttons are identical. On these 3 buses, the leftmost buttons are
main source buttons and the rightmost buttons can be configured as main sources, video effects, or
audio overs. All 16 buttons could be main sources. Up to 8 buttons can be video effects (including
2 XG keyer layers). Up to 2 buttons can be audio overs. The video effect and audio over buttons
match on all 3 of these buses.
The aux bus is different. The leftmost buttons are main source buttons and these correspond to the
main source buttons on the preset, program, and preview buses. The rightmost aux buttons not
committed to main sources can be “aux delegates”
— buttons that select the function of the aux but-
ton row.
With a “bank select” button in the customer-programmable button section, the operator can switch
between two banks of main sources. The button mnemonics change when the sources are switched.
The bank selection button itself turns green or amber depending on which bank is selected.
Menu
Area
Customer-Definable
Buttons
Title Bar
Transition Button
Aux/P review
Bus es
Monitor/
Meter
Section
Transition Control
Program
Layers
Pres et
Layers
Program and
P reset Bus es
Menu “Knobs”
System Control