Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 461 / 595

Chapter 14: Software installation, upgrade, and update procedures 443
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 6: Load the operating system tape on an IPE Module or an
Application Module with an MVME167 card (continued)
Figure 194
Disk-slicing table for 180-Mbyte disk drive
Phase 2. Configure Root And Usr File-Systems And Swap Area
Check the following slicing information for the root file systemÕs disk
drive; indicate below whether you wish to modify this information:
slice offset sl size fs size fsname vol-id info
0 648 60000 60000 root R3 1
1 60648 40000 0 1h8
2 100648 180000 180000 usr R3 1
3 280648 71528 0 1h8
4 0 0 0 1h8
5 0 0 0 1h8
6 0 0 0 1h8
7 0 352176 0 1h8
---> Modify any of these parameters? (y, n, ?, q): [n]
Figure 195
Disk-slicing table for 240-Mbyte disk drive
Phase 2. Configure Root And Usr File-Systems And Swap Area
Check the following slicing information for the root file systemÕs disk
drive; indicate below whether you wish to modify this information:
slice offset sl size fs size fsname vol-id info
0 648 60000 60000 root R3 1
1 60648 40000 0 1h8
2 100648 378000 378000 usr R3 1
3 478648 142 0 1h8
4 0 0 0 1h8
5 0 0 0 1h8
6 0 0 0 1h8
7 0 478800 0 1h8
---> Modify any of these parameters? (y, n, ?, q): [n]
24 You are prompted to modify the parameters. Press [Return] to
indicate that you donÕt wish to change any parameters.