Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 241 / 595

Chapter 9: Meridian Link/CCR interface cabling 223
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Table 80
Cables from transition cards to generic I/O panel (Application Module)
Part number Length Cable description and application
NT7D47DA 35 cm
(14 in.) 15-pin cable: connects the Ethernet port of the MVME712M
transition card to the Ethernet port (this cable is not shipped
with the Application Module)
NT7D58CA
(A0403488) 35 cm
(14 in.) 15-pin to 25-pin subminiature D-style cable: connects port
SP4 on the MVME712M transition card to card 1 conn 4
NT7D79BA
(A0403432) 35 cm
(14 in.) 9-pin to 25-pin subminiature D-style cable: connects ports
SP1, SP2, and SP3 on the MVME712M transition card to
card 1 conn 1Ð3
NT7D95AA 22 cm
(9 in.) 25-pin flat subminiature D-style cable: connects SP1, SP3,
and SP5 on the MVME705B transition card to card 2 conn
1-3 and also connects SP1, SP2, and SP3 of the
NT6D51AA transition card (if present) to card 3 conn 1Ð3