Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 546 / 595

528 Chapter 18: Acceptance testing
553-3202-210 Standard October 1998
4 Type exit and press [Return] to go to the ÒConsole Login:Ó prompt.
CCR or Meridian Link or both have now been installed and verified.
5 Unlock the tape drive and remove the tape.
To ensure that CCR is working correctly, you may want to create a simple
script and execute it. For information on creating and executing a script,
refer to the
CCR User Guide (P0747008).
Note: If you have never written a script nor used script commands,
you may need to refer to someone who has, such as a CCR
administrator.
1 Log into CCR by typing ccrusr and pressing Return.
2 When prompted, type the password and press [Return]. The default
password is
ccrusr .
3 When prompted, type in a user ID (such as 0001) and press
[Return].
4 When prompted, type in the user password (such as admin ) and
press [Return].
5 Write a simple script. Refer to the chapter ÒWriting scriptsÓ in the
CCR User Guide .
6 Validate the script to confirm its accuracy. Refer to the chapter on
ÒWriting scriptsÓ in the
CCR User Guide .
7 Correct any errors found during validation.
8 Install the script. Refer to the chapter ÒWriting scriptsÓ in the CCR
User Guide.
9 Associate the script to a CDN. Refer to the chapter ÒAssociating
CDNs and scriptsÓ in the
CCR User Guide .
10 Execute the script by dialing the CDN.