Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 429 / 595

Chapter 14: Software installation, upgrade, and update procedures 411
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 4: Power down the IPE Module or the Application
Module
1 At the ÒConsole Login:Ó prompt, type maint and press [Return].
2 At the ÒpasswordÓ prompt, type maint and press [Return].
3 At the ÒmaintÓ prompt, type powerdown and press [Return]
.
Figure 140
Powerdown notification message screen 1
maint> powerdown
Would you like to power down or reboot?
Powering down allows you to turn the system off.
Rebooting will automatically restart the system.
Enter p to power down, r to reboot, or q to quit:
4 When prompted to power down, reboot, or quit, type p , and press
[Return] to confirm that you wish to power down.
The information shown in Figure 141 appears on the screen.
Figure 141
Powerdown notification message screen 2
Running subcommand /powerdown/ from menu /machinemgmt/
MACHINE MANAGEMENT
Note: If more than one user is logged into the system, a list of the
logged in users will appear on the screen.
Users currently logged in:
disttech
console Oct 7 16:48
disttech ttya0 Oct 4 17:10 (telesrvr)
Once started, a powerdown CANNOT BE STOPPED.
Do you want to start an express powerdown? [y, n, ?, q]