Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 112 / 595

94 Chapter 6: Site survey/installation checklist
553-3202-210 Standard October 1998
Loading equipment required
Responsible party: _____________________________________________
Delivery constraints: ____________________________________________
Elevator capacity: ______________________________________________
Equipment delivery route to the equipment room: _____________________
_____________________________________________________________
Meridian 1 software checklists
To check the Meridian 1 software, use the Meridian 1 Overlay program 22
(LD 22) and obtain a printout of:
¥ the current software issue (ISS) and package list (PKG) as outlined in
the
Generic X11 Input/output Guide (NTP 553-001-400). Compare the
printout with the following requirements and checklists.
¥ the ADAN information which will be required when setting physical
card address switches on the ESDI (QPC513G) or MSDL card.
¥ the tape ID (TID) which will be required when installing the Meridian
Link/CCR application. Use this information when prompted to enter
your Meridian 1 ID.