Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 526 / 595

508 Chapter 16: Additional application configuration
553-3202-210 Standard October 1998
Procedure 20: Schedule regular backups (continued)
Figure 270
Backup day prompts
Enter day in the form: SUN=Sunday, MON=Monday, ..., ALL=all
Enter a return for no change
Change scheduling day from ÔSUNÕ to:
5 To change the scheduled backup day, type a new day (in the form
SUN for Sunday, MON for Monday, etc., or ALL to specify daily
backup) and press [Return]. To indicate that you do not wish to
change the scheduled backup day, just press [Return].
Figure 271
Reoccurring backup prompt
Should tape backup be reoccurring? [y,n]:
6 You are prompted to indicate whether the backup should reoccur
(that is, either everyday or once a week on the day you specified). If
you wish the backup to occur regularly, type
y and press [Return]. If
you wish to schedule a single backup only, type n and press
[Return].
The following prompt appears:
Figure 272
Backup tape notice
ATTENTION: Make sure a tape is in the drive prior to scheduled backup time
maint>
7 Ensure that you have a backup tape in the tape drive before the
specified time, and not a system tape with software on it. Ensure that
the backup tape is NOT write-protected.