Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 108 / 595

90 Chapter 5: Hardware installation overview
553-3202-210 Standard October 1998
Table 12
Installing an Application Module
Procedure Reference
1. Go through Chapter 6, ÒSite survey/installation checklist.Ó Page 91
2. Go through Chapter 7, ÒUnpack and inspect hardware.Ó Page 115
3. Install an ESDI or MSDL card (if required). See Chapter 8,
ÒHardware installation procedures.Ó Page 142 (SDI/DCH)
Page 145 (ESDI or MSDL)
4. Install the AEM (Application Equipment Module), if
required. Refer to the Application
Equipment Module
Installation Guide
(NTP 553-3201-200).
5. Check the transition card option settings (if necessary).
See Chapter 8, ÒHardware installation procedures.Ó Page 119
6. Install the Application Module. See Chapter 8, ÒHardware
installation procedures.Ó Page 125
7. Cable to external equipment. See Chapter 9, ÒMeridian
Link/CCR interface cabling.Ó Page 227
8. Install the peripheral devices. See Chapter 10, ÒInstalling
peripheral devices.Ó Page 261
9. Configure the Meridian 1. See Chapter 12, ÒMeridian 1
configuration for Meridian Link/CCR.Ó Page 293
10. Configure the links. See Chapter 15, ÒLink configuration.Ó Page 479
11. Install the base operating system and the applications. See
Chapter 14, ÒSoftware installation, upgrade, and update
procedures.Ó
Page 371
12. Configure the applications. See Chapter 16, ÒAdditional
application configuration.Ó
Page 503