Meridian Link/Customer Controlled Routing, Installation And Upgrade Manual

Page: 199 / 595

Chapter 9: Meridian Link/CCR interface cabling 181
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
4 Connect the NT1R03CA extension cable that is connected to the
NT1R03BA octopus cable to the appropriate connector as shown in
Tables 58 and 59. For example, if the IPE module is located in slots
2, 3, and 4, connect the extension cable to connector J2.
Table 58
Option 11 IPE ModuleÑNTIR03BA/NT1R03CA cable connection
(main cabinet)
Slots occupied by the
IPE Module
Connect NT1R03BA/NT1R03CA
cables to connector port
2, 3, 4 J2
3, 4, 5 J3
4, 5, 6 J4
5, 6, 7 J5
6, 7, 8 J6
7, 8, 9 J7
Table 59
Option 11 IPE ModuleÑNT1R03BA/NT1R03CA cable connections
(expansion cabinet)
Slots occupied by the
IPE Module
Connect NT1R03BA/NT1R03CA
cables to connector port
11, 12, 13 J11
12, 13, 14 J12
13, 14, 15 J13
14, 15, 16 J14
15, 16, 17 J15
16, 17, 18 J16
17, 18, 19 J17
18, 19, 20 J18