MediSono P25 EXP, User Manual

Page: 44 / 214

3 Preparing the System
32 Basic User Manual
To adjust the brightness and contrast
Adjusting the LCD monitor’s brightness and contrast is one of the most important factors
for obtaining the optimum image.
The proper setup displays a complete gray scale. The lowest level of black should just
disappear into the background and the highest white should be bright, but not saturated.
Use the buttons located on the bottom of the monitor to adjust the brightness and contrast
settings of the monitor.
●
Press Enter t o enter the monitor menu.
●
Press Enter , press – or to + highlight Auto Adjust , and press Enter to automatically
optimize the monitor settings.
●
Press – to display the setting menu for Contrast . Pr can increase the value of
the contrast; pressing – can decrease the value.
●
Press + to display the setting menu for Brightness . Pr can increase the value
of the brightness; pressing – can decrease the value.
3
�
6 Connecting the Probe
Disconnect the probe from the system after freezing an image or powering the system off.
Otherwise, the system or the probe could be damaged.
3
�
6
�
1 Connecting the Probe
1. Rotate the locking lever 90° anticlockwise to the position, and then insert the
probe connector into the probe port firmly.