MediSono P25 EXP, User Manual

Page: 119 / 214

6 Acquiring Images
Basic User Manual 107
0
M-line
5
Color Flow ROI
2D Imaging
10
To enable or disable the feature:
Tap Simult in the activated PW mode or in the inactivated B+PW mode 2, the two real
time scans in the 2D and the PW modes are displayed.
NOTE:
Simult is only available in the PW mode.
6
�
6 Acquiring Triplex-Mode Images
The triplex mode is overlapped by three different imaging modes, and can be applied to
view the image. The triplex mode includes B+CFM/TDI+M, B+CFM/PDI/TDI+PW and
B+CFM/PDI+CW.
6
�
6
�
1 B+CFM/TDI +M
NOTE:
Only the phased array probes are available for B+CFM/TDI+M.
Perform the following steps to acquire the image.
1. Optimize a CFM/TDI mode image.
2. Press the M key on the control panel to enter the inactivated B+CFM/TDI+M mode.
Figure 6-21 Inactivated B+CFM/TDI +M-Mode Imaging Screen
3. Adjust the M line by using the trackball.
4. Press the Update key on the control panel to activate the M mode.
The basic screen displays the following after being activated.