MediSono P25 EXP, User Manual

Page: 206 / 214

Appendix B EMC Guidance and Manufacturer’s Declaration
194 Basic User Manual
The equipment is intended for use in the electromagnetic environment specified below. The
customer or the user of the equipment should assure that it is used in such an environment.
Immunity Test
IEC 60601
Test Level
Compliance
Level
Electromagnetic Environment and
Guidance
Conducted RF
IEC 61000-4-6
3Vrms
1 5 0 k H z - 8 0
MHz
1 Vrms Portable and mobile RF communications
equipment should be used no closer to any
part of the EQUIPMENT, including cables,
than the recommended separation distance
calculated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance:
80MHz-800 MHz
80 MHz-2.5GHz
Where P is the maximum output power rating
of the transmitter in watts (W) according
to the transmitter manufacturer and d is
the recommended separation distance in
meters (m). Field strengths from fixed
RF transmitters, as determined by an
electromagnetic site survey,
a
should be less
than the compliance level in each frequency
range.
b
Interference may occur in the vicinity
of equipment marked with the following
symbol:
Radiated RF
IEC 61000-4-3
3V/m
8 0 M H z -
2.5GHz
3 Vrms
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.