MediSono P25 EXP, User Manual

Page: 170 / 214

158 Basic User Manual
13 Working with DICOM
13
�
1 Verifying Connectivity
Perform the following steps.
1. Connect the system to the local DICOM network server by using a network cable.
2. Edit the relative settings for the local network and DICOM server. For details, refer to
Section 4.2 Peripheral Device Settings and 4.8 Configuring DICOM.
3. If the verification is successful, you can use the DICOM services.
NOTE:
Ensure the system is connected to the server before using the DICOM service.
Otherwise, the service cannot be used.
13
�
2 DICOM Storage
DICOM Storage is used to send patient data to the DICOM storage server for storage.
13
�
2
�
1 Storing the Current Image
1. Connect a USB drive to the system.
2. Define the Save ) key or the P1 key as Dicom Send on the General Settings
menu - Key Configuration tab.
3. Press the Save ) key or the P1 key in the real-time or frozen mode to send the
current image to the DICOM storage server.
If the transmission fails, a prompt displays on the bottom right of the screen.
13
�
2
�
2 Storing Patient Data
1. Choose the Patient key > Patient List > Patient Review to enter the Patient Review
screen.
2. Select the desired patient, and then click View to enter the Exam Review screen.
3. Select the desired exam.
4. Click DICOM Send to send the patient information and the relevant images to
DICOM storage server.
If you only want to send images, press the Review key on the control panel to enter the
View Image screen, select the desired images, and then click DICOM Send .
If you want to check the status of items sent to the DICOM storage server, choose the
Patient key > Patient List > DICOM Queue .
13
�
3 DICOM Print
DICOM Print is used to send images to the DICOM print server for printing.