MediSono P25 EXP, User Manual

Page: 126 / 214

7 Elastography Imaging
114 Basic User Manual
Elasto
Exit
Frequency
8.0-11.4
Strain Process
4
Strain Map L
5
Contrast
0.62
Transparenecy
0.34
Figure 7-2 Elastogrphy Imaging Parameters Menu
You can tap on the touch screen to turn the current menu to the previous or the next
page if it displays over one page.
To optimize the image by using controls in the following instructions:
●
Tap the left or right part of an item to adjust the parameter, the value displays at the
bottom of the item.
●
Or, rotate the knob on the control panel that is directly below the selected item to
adjust the value.
NOTE:
All parameters can only be adjusted in real-time elastography imaging.
7
�
2
�
1 Strain Map
Strains map allows you to select and apply a color map to the elastography or B-mode
image on the left or right during the elastography imaging. The image will be displayed
with the use of 256-color mapping for each pixel according to the degree of strain using
a scale from red (highest strain, softest), green (average strain, intermediate), to blue (no
strain, hardest).
To adjust the strain map:
●
Tap the left or right part of Strain Map L to choose the color scheme for the
elastography image.
●
Tap the left part of Strain Map R to remove from or choose the color scheme for the
B-mode image.