MediSono P25 EXP, User Manual

Page: 101 / 214

6 Acquiring Images
Basic User Manual 89
6
�
3
�
4 Optimizing CFM/PDI/TDI Mode Images
The touch screen displays all controls related to the CFM/PDI/TDI-mode imaging (as
shown in the figure), you can use them to optimize CFM/PDI/TDI-mode images.
Figure 6-9 Color Flow-Mode Imaging Parameters Menu
To optimize an image by using controls in the following instructions:
●
Tap the left or right part of an item to adjust the parameter, the value displays at the
bottom of the item. You can tap on the touch screen to turn the current menu to
the previous or the next page if it displays over one page.
●
Or, rotate the knob on the control panel that is directly below the selected item to
adjust the value.
NOTE:
You can adjust all parameters in a real time CFM/PDI/TDI mode, but can only adjust
Baseline , Chroma and B Reject in the frozen CFM/PDI/TDI mode.
Gain
Color flow gain optimizes the color flow continuity with less noise interference.
To adjust the gain:
●
Rotate the CFM knob on the control panel clockwise to increase the value.
●
Rotate the CFM knob on the control panel anticlockwise to decrease the value.
CFM
PRF
3.0
WF
185
C Map
1
Steer
< >
Frequency
5.1
Dual Live
Invert
Pannoramic
TDI PDI