MediSono P25 EXP, User Manual

Page: 137 / 214

9 3D Imaging
Basic User Manual 125
−
If is highlighted, use the trackball to resize the ROI.
−
If is highlighted, adjust the sample line by positioning the anchor with the
trackball.
8. Set the user mode, focus position, image quality and sweep angle.
−
Tap an item under User Mode to select a user mode.
−
Tap the Left/Right part of Sweep Angle to adjust the sweep angle of probe.
−
Tap the left or right part of Focus to decrease or increase the depth of focal zone.
−
Tap the left or right part of Image Quality to adjust quality of images.
9. Display the 3D imaging in the following instructions.
−
Tap , or , tap Start or press the Freeze key to display the 3D imaging in
a full, dual or quad display. The system automatically enters the 3D imaging in a
quad display by default.
−
Tap 1 , 2 or 4 on the key panel of the touch screen to display the 3D imaging in a
full, dual or quad display.
The imaging area of the screen is divided into 3 reference images and a 3D image by
default.
Figure 9-2 3D Imaging Screen
As the above figure shows,
●
View A on the top left shows the image on the X-axis.
●
View B on the top right shows the image on the Y-axis.
View C
Angle 55
Map 4
Quality M
Surface
A B
C
3D
View B View A
47
3/1
255
3/30
70
3-4.8
16.5cm
FPS
D/G
GN
I/P
PWR
FRQ
D
3D Image