MediSono P25 EXP, User Manual

Page: 103 / 214

6 Acquiring Images
Basic User Manual 91
●
Tap the left part of Baselines to move the baseline towards the positive direction.
●
Tap the right part of Baseline to move the baseline towards the negative direction.
Color Map
Color map is used to select the method for the color-coding of blood flows.
To adjust the color map:
Tap the left or right part of C Map on the touch screen to make the setting.
NOTE:
When C Map/DPDI is set to 4 or above in the PDI mode, the system automatically
enters the DPDI mode and DPDI appears. At this time, you can view the flow direction
and velocity.
Persistence
Persistence is used to average consecutive frames to provide a smoother appearance with
less noise. Use lower persistence values for fast-moving organs or tissues and higher
persistence values for a smoother appearance.
To adjust the persistence:
●
Tap the left part of Persist on the touch screen to decrease the value.
●
Tap the right part of Persist on the touch screen to increase the value.
Sector Width/Angle
Sector width (for linear probes) or sector angle (for curved and phased array probes) is
used to adjust the frame rate. You can adjust the sector width or angle to get more
information without moving the probe.
The region of interest of the object can be adjusted after you adjust the sector width or
sector angle.
To adjust the sector width/angle:
Tap the left or right part of Sec
�
Width on the touch screen to change the sector width or
angle.
Sector Position
Sector position is used to move or rotate the image.
To adjust the sector position:
Tap the left or right part of Sector Pos on the touch screen to move or rotate the image.