MediSono P25 EXP, User Manual

Page: 145 / 214

9 3D Imaging
Basic User Manual 133
Central Slice
Slice
Slice Area
Figure 9-5 Multi-Slice Imaging Screen
Nine slices and the corresponding number are displayed on the slice imaging. The middle
full line is the central slice in the current slice axis, and it is numbered as 0.
Except for the central slice, the other eight slices are indicated by the number at the top left
corner of the slice and are displayed on the screen. Tap the Left/Right part of Display to
move all the slices in the slice area left or right.
Move the cursor on the one slice by using the trackball to select it.
To adjust the slice position/slice distance/slice number,
●
Tap the Left/Right part of Adjust Pos. to fine-tune the selected slice position.
●
Tap the Left/Right part of Distance to adjust the distance among the slices. The span
and content vary with this setting.
●
Tap the Left/Right part of Slice Num to decrease or increase the number of slices.
After adjusting, the slice position, slice distance, the slice number, and the corresponding
image of the slice will change accordingly.
9
�
2
�
10 Setting the Scan Mode
Set Scan Mode in accordance with your preference.
Tap Linear or Sector to set the sweep mode.
-
+4 +3
+2
+1
+0
-1
+ 4
-2 -3
4