MediSono P25 EXP, User Manual

Page: 149 / 214

Basic User Manual 137
10 4D Imaging
−
If is highlighted, use the trackball to resize the ROI.
−
If is highlighted, adjust the sample line by positioning the anchor with the
trackball.
7. Set the stability, user mode, focus position, image quality and sweep angle.
−
Tap an item under User Mode to select a user mode.
−
Tap the Left/Right part of Sweep Angle to adjust the sweep angle of probe.
−
Tap the left or right part of Focus to decrease or increase the depth of focal zone.
−
Tap the left or right part of Image Quality to adjust quality of images.
−
Select the left or right part of Stability to enable or disable the image quality
feature.
For other parameters, refer to Section 9.2 Working with 3D Images.
8. Display the 3D imaging in the following instructions.
−
Tap , or , tap Start or press the Freeze key to display the 4D imaging in
a full, dual or quad display. The system automatically enters the 4D imaging in a
quad display by default.
−
Tap 1 , 2 or 4 on the key panel of the touch screen to display the 4D imaging in a
full, dual or quad display.
The imaging area of the screen is divided into 3 reference images and a dynamic 3D
image by default.
Figure 10-2 4D Imaging Screen
As the above figure shows,
View C
Angle 55
Map 4
Quality H
Surface
A B
C
3D
PWR 70
FRQ 3-4.8
D
16.5cm
View B View A
47
3/1
255
3/30
FPS
D/G
GN
I/P
3D Image