MediSono P25 EXP User Manual Download Page 3

Page: 3 / 214

●

The advanced user manual provides information about the measurements and calculations

available in each mode.

●

Compact Disc (CD) provides the acoustic output data related to the system.

Signal words in this manual are defined as follows. Please understand their meanings clearly before

reading this manual.

Signal Word

Meaning

Indicates a potentially hazardous situation which, if not avoided, could result in

death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in

malfunction or damage of the system.

NOTE

Indicates precautions or recommendations that should be used in operating the

system.

Indicates a potentially biological hazardous situation which, if not avoided, may

result in disease transmission.

Boldfaced

Word

Indicates keys and controls located on the control panel, or on-screen objects

such as menu items or keys.

Contact Information

Manufacturer: MEDISONO

Address: 3511 Silverside RD. Wilmington, DE 19810,United States

[email protected]

Summary of Contents for P25 EXP























































































































































































































Search results

Summary of Contents for P25 EXP

Reviews:

Brands by name

Popular brands

MediSono P25 EXP, User Manual

Search results

Summary of Contents for P25 EXP

Reviews:

Brands by name

Popular brands