MediSono P25 EXP, User Manual

Page: 192 / 214

14 Probes and Biopsy
180 Basic User Manual
4. Verify that the path of the needle displays according to the guidelines shown on the
image screen. After verification, the needle guide is ready for use.
14
�
2
�
5 Performing a Biopsy
NOTE:
Ensure the biopsy bracket is properly attached to the compatible probe and be verified
before you perform a biopsy.
Perform the following steps:
1. Choose Setup > General > General , set Guide Line Type to Gun or Needle .
2. In the real-time B mode, tap Biopsy to enable the biopsy feature.
For C322, C353, 3P1 or L742 probe, you can preset the biopsy angle.
3. Perform a scan to locate the target.
4. Perform the puncture by sliding the needle through the groove in the guide until the
needle, as shown on the display, intercepts the target.
You can tap Biopsy Cali
�
to adjust the biopsy guideline.
On this menu,
−
For C322, C353, 3P1 or L742 probe, tap the left or right part of Angle Select to
adjust the angle of the biopsy guideline freely.
−
Tap the left or right part of Offset or Angle to adjust the position or angle of the
biopsy guideline gradually.
Biopsy
Cali.
Exit
Offset
41.4
Angle
15.4
Angle Select
Min
Load Default Save
User Mode