Contents/Notes
25
Depending on the usage condition, the
battery pack may inflate slightly when
the battery life is almost over. This is not
a malfunction.
Do not store the battery pack in the
following cases:
•
The battery is fully charged (immediately
after the charging is complete)
•
The battery has run out (the terminal cannot
power on)
The performance and life of the battery pack
may deteriorate.
It is recommended that you store the battery
pack with around 40% battery level.
Handling the Adapter
The ambient temperature of the room
should be 5
˚
C to 35
˚
C.
Do not charge the battery pack:
•
In a humid, dusty or unstable place
•
Near a land-line phone, TV or radio
It is normal that the adapter become
warm while charging. Keep using it.
Do not use the DC adapter to charge the
battery when the car engine is not running.
Doing so may drain the car battery.
If you use an electrical outlet with an
unplugging-protection mechanism, follow
the instructions of the manual for the
outlet.
Do not expose the adapter to strong
shocks. Do not deform the charging
terminal.
Doing so may cause malfunction.
Handling the miniUIM
Do not apply excessive force to the
miniUIM when attaching/removing it.
Note that the warranty does not cover
damage caused by inserting the miniUIM
into another type of IC card reader or
writer.
Always keep the IC part clean.
Wipe with a soft, dry cloth (such as an
eyeglass cleaning cloth).
Please keep a separate record of the
information you have registered in your
miniUIM.
Please be aware that DOCOMO bears no
obligation or responsibility in the event that
data is altered or lost.
To preserve the environment, bring
discarded miniUIM to Service Counter
such as docomo Shop.
Do not damage, unnecessarily handle, or
short-circuit the IC chip.
Doing so may cause data loss or malfunction.
Do not drop the miniUIM or expose it to
strong shocks.
Doing so may cause malfunction.
Do not bend the miniUIM or place a
heavy object on it.
Doing so may cause malfunction.
Do not put a label or sticker on the
miniUIM when attaching it to the
terminal.
Doing so may cause malfunction.