Appendix/Index
163
■
Charging
Cannot charge (Notification LED does not light
or blinks)
Is the battery pack inserted correctly?
P. 37
Is the adapter power plug or
cigarette lighter plug securely
connected to an electric outlet or
cigarette lighter socket ?
-
Make sure that the microUSB plug is
properly connected to the terminal
when using the AC Adapter 04
(optional).
P. 39
Check the following points if using
a PC to perform charging.
•
Is the PC power turned on?
•
Disconnect all other USB devices.
•
Connect the USB cable directly to
the USB port of a PC that is
receiving power.
•
Has the terminal battery depleted?
Connect to a PC after charging for
a while with an AC adapter, etc.
•
Are the USB plug of the Micro USB
Cable 01 (optional) and microUSB
plug firmly inserted?
P. 40
If you make a call, perform data
communication, or use some other
function for a long time while
charging, the terminal may become
hot and charging may be stopped.
In this case, charge again after the
terminal cools down.
-
■
Operation of the terminal
Becomes hot during operations or charging
The terminal, battery pack, or
adapter may become hot during
operation or charging, or if you use
the camera function for a long time
while charging. This is not an
operation problem, and so you can
continue to use them.
-
If you use the camera function for a
long time, the terminal may become
hot and the camera function may
shut off. Wait a while before
restarting to use the camera
function.
-
Battery usage time is short
Has the terminal been out of the
network service area for a long
time?
As the terminal searches for radio
waves in order to enable
communication when out of the
network service area, more
electricity is consumed than usual.
-
The battery pack usage time varies
depending on the usage conditions
and the degradation level.
P. 38