Settings
123
PIN1 code
The miniUIM has a settable security code,
PIN1 code. It is set to "0000" (four zeros) at
the time of subscription, but you may
subsequently change it.
PIN1 code is a 4- to 8-digit number (code)
that is entered to confirm the user when the
miniUIM is inserted in the terminal or the
terminal power is turned on. It is intended
to prevent unauthorized use by a third
party. Entering PIN1 code makes the
terminal operable.
If you want to use a miniUIM that has been
used on a different terminal, use the same
PIN1 code that had been set on the different
terminal. The code is "0000" if the default
setting has not been changed.
If you enter the incorrect PIN1 code 3 times in
succession, the PIN1 code is locked. Unlock
using "PUK code".
Enabling the miniUIM's PIN
Set to require entry of the PIN1 code when
power is turned on.
1
From the application list screen,
"Settings"
▶
"Security"
▶
"Set
up SIM card lock"
2
"Lock SIM card"
▶
enter the PIN1
code
▶
"OK"
To change the PIN1 code
The "SIM card lock" must first be enabled.
1
In the application list screen,
"Settings"
▶
"Security"
▶
"Set
up SIM card lock"
2
"Change PIN1 code"
▶
enter the
current PIN1 code
▶
"OK"
▶
enter the new PIN1 code
▶
"OK"
▶
enter the new PIN1 code again
▶
"OK"
PIN unblocking key (PUK code)
The PIN unblocking key is an 8-digit number
used to unblock the PIN1 code. You cannot
change the key yourself.
If you enter the incorrect PUK code 10 times
in succession, the miniUIM is locked. If this
happens, please contact a docomo Shop.
■
Unblocking the PIN1 locked miniUIM
•
If a message is displayed that PIN1 is locked, it
can be unlocked using the procedure below.
Enter a PIN unblocking key in the "PUK code"
field
▶
Enter a new PIN1 code in the "New PIN
code" field
▶
"OK"
