Getting Started
46
Setting an access point
The access points (sp-mode, mopera U)
required for connecting to the Internet are
preset. You may add or change them as
required.
The sp-mode is set as the default access point.
Configuring access point to be used
1
From the application list screen,
"Settings"
▶
"More..."
▶
"Mobile networks"
▶
"Access
Point Names"
2
Tap the radio button for the
access point
Adding an access point
1
From the application list screen,
"Settings"
▶
"More..."
▶
"Mobile networks"
▶
"Access
Point Names"
2
" "
▶
"New APN"
3
"Name"
▶
enter the name of the
new network profile
▶
"OK"
4
"APN"
▶
enter the access point
name
▶
"OK"
5
Enter any other items requested
by your network operator
6
" "
▶
"Save"
NOTE
Do not change MCC to anything other than
440, or MNC to anything other than 10. If you
do this, registered/added access points will no
longer display on the screen. If access points no
longer display due to the MCC and MNC
settings being changed, you can either initialize
the access points or manually set the access
points again.
Initializing an access point
When you initialize an access point, it returns
to its default settings.
1
From the application list screen,
"Settings"
▶
"More..."
▶
"Mobile networks"
▶
"Access
Point Names"
2
" "
▶
"Reset to default"
