Appendix/Index
185
FCC Regulations
This mobile phone complies with part 15 of
the FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
This mobile phone has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not
occur in a particular installation; if this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
Declaration of Conformity
Hereby, NEC CASIO Mobile Communications,
Ltd. declares that this product is compliance
with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Declaration of Conformity can be found on
http://www.n-keitai.com/lineup/index.html
(Japanese only).
This mobile phone complies with the EU
requirements for exposure to radio waves.
Your mobile phone is a radio transceiver,
designed and manufactured not to exceed
the SAR* limits** for exposure to radio-
frequency (RF) energy, which SAR* value,
when tested for compliance against the
standard was 0.413 W/kg. While there may
be differences between the SAR* levels of
various phones and at various positions,
they all meet*** the EU requirements for RF
exposure.
