Appendix/Index
169
■
Data management
Data transfer is not working
Are you using a USB hub? If you use
a USB hub, data transfer may not
work properly.
P. 130
Data saved in the microSD card is not displayed
Is the microSD card inserted
correctly?
P. 36
■
Bluetooth function
The terminal cannot find or be connected to a
Bluetooth enabled device
Put the Bluetooth enabled device
(commercial) on standby and register
it on the terminal. If you want to
delete a registered device and
register it again as a new device,
you must delete the registered
device from both the Bluetooth
enabled device (commercial) and the
terminal before you register it again.
P. 105
Cannot make calls from the terminal when it is
connected to a car navigation, handsfree, or
other external device.
If you try calling someone multiple
times, such as when you are out of
the service range or the person does
not answer, calling to that number
may be disabled in certain cases. If
this happens, turn the power of the
terminal off and then on again.
-
■
Map and GPS functions
The AUTO-GPS service information cannot be
set
Is the battery power low, or is the
AUTO-GPS function stopped? If the
AUTO-GPS function is stopped, it
can not be possible to set the AUTO-
GPS service information depending
on the "Low-power operation
settings". In this case, either set
"Low-power operation settings" to
"Not suspend", or enable setting by
charging the battery.
P. 38
P. 118
Is the check mark removed from
"AUTO-GPS"?
P. 118