Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
99
of
124
9) RIP packets receive version : v2
10) Split horizon : Enabled with Poisoned Reversed
11) Joined RIPv2 multicast group: Yes
12) Response send queue counter : 0
13) Next route update timer in : 8 sec
14) IP interface address :
21.1.1.1/16
***********************************
Comments on the information
1.
RIP is enabled at the interface
2.
The interface belongs to the global vrf.
3.
The interface is not down.
4.
The interface is not configured to passive
5.
The interface is not configured to standby
6.
The interface can send RIP packets.
7.
The interface sends RIP packets through RIPv2.
8.
The interface can receive RIP packets.
9.
The interface receives RIP packets through RIPv2.
10.
Enable poison reverse.
11.
The interface is added to the RIPv2 multicast group.
12.
The count of the response query sent by the interface is 0.
13.
The next route update cycle is in 8S.
14.
The IP address of the interface is : 21.1.1.1/16.
You can check whether the RIP configuration of the switch is effective
according to the preceding interface information. The displayed
information covers all RIP configuration information and the default
configuration information.
RIP routing table information:
Swtich-A#show ip route rip
Codes: C - connected, S - static, R - RIP, O - OSPF, OE-OSPF
External, M - Management
