Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
12
of
124
1.
The port is err-
disabled.
After some wrong conditions are found on one port, the port is
shutdown temporarily and the action is called err-disabled,
First, use the show port command to view whether the port is
err-disabled, and then use the show port xxx status err-
disabled command to view which module err-disables the
port.
2.
The port is configured
with err-disable
recovery.
You can configure one module port to be restored
automatically. In this way, after the port is err-disabled, enable
one recovery timer. After the timer reaches, the port is
recovered automatically. You can use the show errdisable
command to view the auto recovery configuration of the
module.
