Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
88
of
124
network 129.255.0.0 0.0.255.255 area 0
exit
interface vlan500
ip address 129.255.19.10 255.255.0.0
exit
Use the show tool to collect the following information on switch A.
OSPF interface information:
Command: show ip ospf interface vlan500
Vla
n500 is up, line protocol is up
(1) Internet Address 129.255.19.20, 129.255.255.255( a[129.255.19.20]
d[129.255.255.255]) Area 0.0.0.0, MTU 1500
(2) Process ID 64, Router ID 2.2.2.4, Network Type BROADCAST, Cost: 1
(3) Transmit Delay is 1 sec, State DR, Priority 1, TE Metric 0
(4) Designated Router (ID) 2.2.2.4, Interface Address 129.255.19.20
(5) Backup Designated Router (ID) 11.0.0.1, Interface Address
129.255.19.10
(6) Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:08
(7) Neighbor Count is 1, Adjacent neighbor count is 1
Crypt Sequence Number is 0
Hello received 1793 sent 3420, DD received 6 sent 9
LS-Req received 3 sent 2, LS-Upd received 34 sent 27
LS-Ack received 27 sent 33, Discarded 0
Comments on the information:
1.
The IP address, area, and MTU of the interface
2.
The OSPF process ID, router ID, OSPF network type, and the cost
value of the interface
3.
OSPF packet transmission delay, status, and priority of the interface
4.
DR router ID and DR IP address of the network
