Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
116
of
124
Information 3:
IIH packet prompt
message;
Authentication Failure
Indicates that the authentication types or authentication
parameters are not matched.
Information 4:
IIH packet prompt
message;
Hello PDU type invalid
Indicates that the network modes are not matched.
Information 5:
IIH packet prompt
message;
mismatch with circuit type
Indicates that the ISIS or interface level parameters are not
matched.
Information 6:
IIH packet prompt
message;
IPv4 interface address
mismatch
Indicates that the IIH packet source addresses are not matched
(the ip unnumbered may be set, but the interfaces at two ends
are not configured with ip route peer-address command to bind
the opposite IP address).
Information 7:
LSP/SNP packet prompt
information:
Authentication Failure
Indicates that the LSP/SNP authentication types or
authentication parameters are not matched.
