Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
117
of
124
Cluster Management
Troubleshooting
Thi
s chapter describes the common problems encountered in cluster
management for the network administrator to locate the problems.
Main contents:
z
Basic idea of cluster management troubleshooting
z
Common clu
ster management troubleshooting
Basic Idea of Cluster
Management Troubleshooting
1.
Chec
k the configuration of NDSP of the device and the port.
Method: use the show run command to check whether the NDSP protocol
is enabled globally and under the device port.
2.
Check whether the NDSP information is correct.
Method: use the show ndsp neighbors command to check whether the
neighbor information is correct.
3.
Check whether the MCMP protocol is enabled.
Method: use the show run command to check whether the MCMP protocol
is enabled globally.
4.
Check the result of topology collection is correct.
Method: use the show cluster topo information command to check whether
the topology collection result is correct.
5.
Check whether the status of the member device is correct.
