Mypower
S4100
Troubleshooting
Maipu Confidential & Proprietary Information
Page
98
of
124
The application of the show tools is as follows.
As shown in the preceding figure, switch-A is connected with VLAN 21
（
21.1.1.2/16
）
of switch B through VLAN 21
（
21.1.1.1/16
）
. 14.14.14.14
is the IP address of the switch B loopback interface. The configuration is as
follows:
Switch-A
：
router rip
network 21.0.0.0
version 2
no auto-summary
exit
Switch-B
：
router rip
network 14.0.0.0
network 21.0.0.0
version 2
no auto-summary
exit
Use the show tool to collect the following information on switch A.
Interface
Table Information
:
Switch-A#show ip rip interface
Vlan21 is up, line protocol is up
1) RIP enable status : Enable
2) VPN
Routing/Forwarding(VRF) : kernel
3) Possible down : No
4) Passive interface : Disabled
5) Standby interface : None
6) RIP packets send : Enable
7) RIP packets send version : v2
8) RIP packets receive : Enable
