![background image](http://html1.mh-extra.com/html/magnetek/hpv-900-series-2/hpv-900-series-2_technical-manual_3606659145.webp)
Utility U0 Menu
123
TIME
(Time Setting Function)
The clock located at the top of the operator
under the user LED, will set after the SECOND
parameter has been enter.
For the year, enter the last two digits
corresponding to the current year. This will
update and continue to be stored in the U11
submenu.
Enter the month based off of a 12 month
calendar. This will automatically update and
continue to be stored in the U11 submenu.
Next, enter the current day. This will
automatically update and continue to be stored
in the U11 submenu.
The hour is based off a 24 hour clock. This
number will be automatically stored, however,
after setting this value in the U11 submenu, it
may be viewed on the top of the display and
the U11 parameter will reset back to zero.
Enter the Minute next. This number will be
automatically stored, however, after setting this
value in the U11 submenu, it may be viewed
on the top of the display and the U11
parameter will reset back to zero.
And finally enter the seconds. This number
will be automatically stored, however, after
setting this value in the U11 submenu, it may
be viewed on the top of the display and the
U11 parameter will reset back to zero.
U11 8:55
Year
09
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U11 8:55
Month
04
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U11 8:55
Day
23
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U11 8:55
Hour
11
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U11 8:55
Minute
23
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY
U11 8:55
Seconds
11
READY
RUN
USER
FAULT
TORQUE
LIMIT
SUB MENU
DATA ENTRY